JDownloader Community - Appwork GmbH
 

Reply
 
Thread Tools Display Modes
  #1  
Old 06.03.2009, 16:31
kddh
Guest
 
Posts: n/a
Default Fritz!Box Reconnect via Telnet

Hi,
I just used first time JDownloader

Its a bad idea to suggest users to fully enable UPNP in Fritz!Box just to be able to do a reconnect! (Remember: By default, Fritz!Box UPNP is read-only, so trojan-horses etc. will not be able to do any changes like port-forewarding, while read-only UPNP-functions work fine).

Here is the better way:
Do do a reconnect, open telnet-session to Fritz!Box and, after sending the password, just send:

dsld -s && dsld

This will stop the dsl-daemon (dsl -s) and start it again (dsl).
When You receive the prompt-string, reconnection is already done.
So easy

edit:: telnet is included in somewhat newer releases of the fritz!box firmware, but users have to dial a special telefonecode to enable telnet.

grx
kddh

Last edited by kddh; 06.03.2009 at 16:34.
Reply With Quote
  #2  
Old 06.03.2009, 17:05
Rainman
Guest
 
Posts: n/a
Default

err..
1. wrong forum (why have u posted in german wishes ??)
2. no one uses telnet anymore, it is THIS old. (u could use Morse codes for equal)
3. for fritz!boxes i recommend special reconnect-scripts that dont need UPNP to be active
Reply With Quote
  #3  
Old 06.03.2009, 18:30
kddh
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Rainman View Post
err..
1. wrong forum (why have u posted in german wishes ??)
2. no one uses telnet anymore, it is THIS old. (u could use Morse codes for equal)
3. for fritz!boxes i recommend special reconnect-scripts that dont need UPNP to be active
1. sorry, hmm ... shall I continue in german or in english?
2. well, telnet is a good choice at this point, because users can just use it, whilst for a ssh-connection users would have to install a sshd like dropbear to their fritzbox.
3. which reconnect-scripts do you mean? I managed to record and use a http-script, but this is an ugly method and with next firmwareupdate it may change. Even more, this wasn't a beginners-friendly approach If you have a better script, please let me know.

yours
kddh
Reply With Quote
  #4  
Old 06.03.2009, 19:10
Rainman
Guest
 
Posts: n/a
Default

if u can, in german the board admin will move this thread anyway.

**External links are only visible to Support Staff****External links are only visible to Support Staff**

is the most actual link i found. but u have to register

**External links are only visible to Support Staff****External links are only visible to Support Staff**

is an old link, but u dont have to register and its working perfectly for me! (FB 7270)

Last edited by Rainman; 06.03.2009 at 19:13.
Reply With Quote
  #5  
Old 06.03.2009, 20:22
kddh
Guest
 
Posts: n/a
Default I'm sorry...UPNP-Reconnect just works fine!

Hi,
well it was my mistake.

I just discovered that Fritz!Box allows Reconnect via UPNP even if UPNP-controlling is not enabled!

For some reason, JDownloader told me to change the UPNP-Settings in Fritz!Box because UPNP-Reconnect failed.

As I discovered that UPNP-reconnect does work, I tried this setting again in JDownloader-Config and well: now it works.

So maybe, the admin may just remove this thread....

yours
kddh
Reply With Quote
  #6  
Old 06.03.2009, 20:54
Rainman
Guest
 
Posts: n/a
Default

no problem^^ all fine now
Reply With Quote
  #7  
Old 06.03.2009, 21:05
Sheadox
Guest
 
Posts: n/a
Default

Thread moved
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +2. The time now is 13:10.
Provided By AppWork GmbH | Privacy | Imprint
Parts of the Design are used from Kirsch designed by Andrew & Austin
Powered by vBulletin® Version 3.8.10 Beta 1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.