#641
|
|||
|
|||
Quote:
Button "nach diesem download stoppen" Es werden von der Downloadliste und vom Linksammler automatisch Backups angelegt. Deren Anzahl lässt sich über die Profieinstellungen festlegen: GeneralSettings: Keep XOld Lists |
#642
|
|||
|
|||
Quote:
Bedeutet die Einstellung 5 dass maximal 5 angelegt werden? Ich habe die Datei downloadList139 - downloadList144.zip in /cfg gefunden. Das sind schon 6. Sind dies die BackUps oder werden diese wo anderst gespeichert. |
#643
|
|||
|
|||
Die Liste mit der höchsten Nummer ist die aktuell verwendete. Alle anderen sind Backups. Allerdings reichen die Backups nicht allzu weit in die Vergangenheit, auch mit der maximalen Anzahl (20) nicht.
|
#644
|
|||
|
|||
1 funktionsfähiges BackUp reicht mir. Solange dieses nicht überschrieben wird ist dies ausreichend. Wenn ich nun 5 habe sollte ich auf der sicheren Seite sein. Was mich nur gewundert hat ist warum bei mir mehr als 5 sind. Die Einstellung steht auf 5. Also wird wahrscheinlich 1 extra BackUp angelegt.
|
#645
|
|||
|
|||
Es sind deshalb 6 Dateien, weil die Datei mit der höchsten Nummer die aktuelle Liste ist. Es gibt also kein extra Backup. Auch solltest du den Hinweis, dass die Backups nicht weit in die Vergangenheit reichen, ernst nehmen. Denn nach Änderungen in der Liste wird die in einer neuen Datei mit der nächsten Nummer gespeichert und irgendwann überzählige Backups gelöscht.
|
#646
|
||||
|
||||
@oEFLKQzikCqw
Du kannst doch einstellen, wie lange die Logs aufgehoben werden sollen: Log: Cleanup Logs Older Than XDays Steht bei mir auf 2, das ist dann wohl die Standardeinstellung - da bringen dir 200 Logs natürlich auch nix^^ GreeZ psp
__________________
JD Supporter, Plugin Dev. & Community Manager
Erste Schritte & Tutorials || JDownloader 2 Setup Download |
#647
|
|||
|
|||
Äh
Logs != Backups der Download- u. Linkgrapperliste |
#648
|
||||
|
||||
Tschuldigung, war wohl in Gedanken woanders :D
GreeZ psp
__________________
JD Supporter, Plugin Dev. & Community Manager
Erste Schritte & Tutorials || JDownloader 2 Setup Download |
#649
|
|||
|
|||
Ich hätte mal eine Frage zu Captchas.
Free lade ich fast nie runter, deswegen habe ich es erst jetzt bemerkt. Ich habe über 10 Versuche gebraucht, um ein Captcha richtig in JD2 einzutragen. Wenn ich aber mit Browser auf die einzelnen Seiten gehe, sind die Captchas so viel einfacher. Wieso ist das der Fall? Getestet auf: keep2share.cc share-online.biz |
#650
|
||||
|
||||
Hi
Das wissen wir selbst noch nicht ganz, aber wir sind dran! GreeZ psp
__________________
JD Supporter, Plugin Dev. & Community Manager
Erste Schritte & Tutorials || JDownloader 2 Setup Download |
#651
|
|||
|
|||
eine Sache, wo ich mir eigentlich sicher war, dass sie mittlerweile von genug Leuten angesprochen und gefixt wurde. Dem war aber wohl nicht so
=> jedes Mal geht das Eigenschaftenfenster eines Pakets auf, wenn ich in der Downloadliste ein Paket anklicke, auch wenn man das Paket nur mit + aufklappt. Das nervt tierisch. => kann man das nicht abstellen, so dass man auf Wunsch zum Eigenschaftsfenster nur noch via "Package Double Click Action" kommt. Der Punkt fehlt nämlich leider in der Package double click action Auswahl bei den Profieinstellungen. => dass also rein gar nichts passiert, wenn man auf ein Paket klickt und man dennoch zum Eigenschaftsfenster via Doppelklick kommt? das wäre wirklich ein großer Segen und würde mir in Zukunft viele Haare sparen ... |
#652
|
|||
|
|||
Gibt es eigentlich diesen Check ob Links bereits vorhanden sind nicht mehr? Im JD wurden Links im Linksammler farblich hervorgehoben und man konnte sehen ob diese schon vorhanden sind.
|
#653
|
|||
|
|||
Minor nit:
When a premium account is close to be expired, JD2 shows a warning-dialog: "Your XYZ premium account (username: ABC) will expired soon." |
#654
|
|||
|
|||
Hmm ich hätte da mal eine Frage.
Ka ob es das Feature schon gibt, aber wie wäre es mit einer Low Speed Erkennung im JD. Das man einstellen kann, unter dieser oder dieser Geschwindigkeit soll er neu connecten um wieder eine bessere Verbindung hinzubekommen. Is nur so eine Idee und wie gesagt, ich weiß nicht ob es das Feature schon gibt und ich es nur noch nicht gefunden habe.. ^^ |
#655
|
||||
|
||||
das gibt es nicht, und soll es auch nicht geben.
Das habe ich zuletzt gehört. frag bitte Pspzockerscene, für weitere Details. |
#656
|
|||
|
|||
Hmm schade, wäre ein nützliches Feature, was den JD um einiges bereichern würde.. ^^
|
#657
|
||||
|
||||
Hat sich inzwischen geändert, das Feature könnte es irgendwann geben, hat aber keine Prio.
GreeZ psp
__________________
JD Supporter, Plugin Dev. & Community Manager
Erste Schritte & Tutorials || JDownloader 2 Setup Download |
#658
|
|||
|
|||
Trojaner wieder entfernen
Hallo, vielen Dank für den sehr guten JD2-Web-Installer. Die Clean-Installer habe ich leider erst zu spät gesehen.
Es war ein wenig unschön, dass mein Firefox nach der Installation einfach gekillt wurde (hatte gerade eine wichtige Seite offen), aber was will man machen, um die Hijacks zu installieren. Nun ist meine Homepage "**External links are only visible to Support Staff**, die praktischerweise auch meine im Computer installierten Festplatten im Query-String übertägt und natürlich das nützliche Spyware-Plugin "Fast Start". Beides wurde ohne meine Zustimmung installiert. Im Gegensatz zu Norton, was ich ja abwählen konnte. Meine Frage nun: Gibt es irgendwo eine Liste über alle von http://installer.jdownloader.org/WebInstallerJD2.exe installierte Malware? Sind ja sicher viele weitere Sachen ohne mein Wissen installiert worden. Vielen Dank für die Hilfe |
#659
|
|||
|
|||
Trojaner entfernen, Teil 2
Ok, das meiste ist vielleicht über die Systemsteuerung entfernt.
Vorsicht übrigens: sweet-page zerstört das komplette Firefox-Profil. Jeder macht ja Backups und BETA ist klar. Aber man könnte vor der Installation schon warnen, dass die enthaltene Malware garantiert zu Datenverlusten führen wird. Frage: Wie kriege ich den "IePlugin services"-Dienst wieder weg? (C:\ProgramData\IePluginServices\PluginService.exe -service) Außer über die Kommandzeile (als Admin) mit "sc.exe delete"? Etwas benutzerunfreundlich ohne Uninstaller. Danke nochmals! |
#660
|
|||
|
|||
Simpler would be better
I find the new interface for JD2 at once both more complicated and at the same taking away choice that you had in JD1.
For example, in JD1 you could choose to turn on or off individual archive extration tools. In JD2 it's all or nothing. This doesn't make sense. I choose to manually extract RAR or ZIP archives because they may have multiple files inside. I want to be able to choose which indivual files in the archive to extract. However HJSplit files are only a single file in pieces, so joining them together doesn't create any unwanted files. In JD1 I would uncheck the RAR/ZIP extraction and leave the HJSplit and they would be joined automatically. Now that's no longer an option. I have to manually do everything. I used to be able to customize the menu bar by adding an icon to delete finished packages. One click and they were gone. In JD2 I have to add some icon which has a whole list of items, find the one for Clean Up, then choose Delete Links: Finished and then I get a dialog box I have to select OK. Why did you have to take something that you could do with 1 click and make it a time consuming chore? I would go back to JD1 but after reinstalling it and updating the plugins it no longer works properly. So I'm stuck with JD2. |
#661
|
||||
|
||||
@battuta
With the new extraction addon everything is done with this, also with leaving rar binaries we are relying on 7zip java library. I personally don't use this myself but far as I can tell everything is possible except having a way to extract hjsplit files when auto extract after download is disabled. Since HJsplit files and rar can share the same extensions .000 .001 etc it can be hard to identify them without opening the file to check meta. The only other solution I can think of within current design, is making package customiser rule for sites you know use HJsplit files to these links and enable extraction within rule. Cleanup can still be one click action, edit the bottom bar or main menu and remove them from submenu. Customisation is totally up to you, define all your menus and what not as you see fit. settings > user interface. Also have a look you can change the actions of each of the buttons to suit your needs.
__________________
raztoki @ jDownloader reporter/developer http://svn.jdownloader.org/users/170 Don't fight the system, use it to your advantage. :] |
#662
|
|||
|
|||
I am new member registered just to comment about jdownloader 2. It is really impressive. Interface looks superbly modern, notifications are friendly and useful and performance seems solid so far about 439mb memory used with 105 files in queue.
I am obviously not using all features however I have to say a big thank you to the entire team and the community for a great application! Keep up the good work! |
#663
|
|||
|
|||
First of all, i have to say i love JD2, but there is a feature a would like to see on JD and it is something really simple "remember my downloaded files", it is something i have seen in others download managers and it is very useful for me, it is something like highlighting the files you have already downloaded, that way you avoid to waste time downloading something you alreary have before.
|
#664
|
|||
|
|||
Quote:
Customizing a menu item's name does not change how it appears in the interface... and it should. E.g. I moved a few of the Speed Limit options to the bottom toolbar like JD1. I then edited the cumbersomely named "Max. simultaneous Downloads" to say "Max. Dls." (again like JD1). The result was that the name was changed in the menu customizer, but it still takes up a third of the bottom bar with the full original name. Last edited by raztoki; 08.09.2014 at 11:10. Reason: merge double post |
#665
|
||||
|
||||
I agree with you guys - we got all the good functions and settings on board but need to figure out some good default settings.
Everyone is invited to post suggestions for "mainstream" default settings GreeZ psp
__________________
JD Supporter, Plugin Dev. & Community Manager
Erste Schritte & Tutorials || JDownloader 2 Setup Download |
#666
|
|||
|
|||
What is the best way to post, as screenshots showing opened sub-menus or exports from the customizer?
The latter is more efficient, but really doesn't convey the look. |
#667
|
|||
|
|||
Download-Liste: Spalten:
JDownloader 1: Die Werte von "geladene Bytes", "Gesamt-Bytes" und "Download-Fortschritt" waren in nur einer Spalte. Die Werte von "Rest-Zeit" und "Download-Status" waren ebenfalls in nur einer Spalte. JDownloader 2: Die Werte sind jetzt auf 5 Spalten verteilt => Platz-Verschwendung. Verbesserungs-Vorschlag: Die alten und die neuen Spalten anbieten und den Benutzern die Auswahl überlassen. Download-Liste: Bildlauf-Leiste (Scroll-Bar): JDownloader 1: Die Bildlauf-Leiste war so breit wie die Bildlauf-Leisten in den anderen Programmen. Bei mir sind da 24 Pixels eingestellt (Windows-System-Steuerung). Mit der Maus kann ich die Leiste fast blind treffen. JDownloader 2: Grauenhaft schmale Bildlauf-Leiste mit nur 10 Pixels. Die treffe ich ganz oft nicht. Das geht echt an die Nerven. Verbesserungs-Vorschlag: Die Benutzer das einstellen lassen. Last edited by raztoki; 08.09.2014 at 04:24. Reason: merge double post into one, as rules stipulate. |
#668
|
|||
|
|||
I was surprised to find 'Enable' didn't appear for right-clicking a package on the download tab, only specific links.
I believe it was because some links were already enabled and the rest weren't. Is that by design? |
#669
|
|||
|
|||
(CuF): Yes, JD1 had separate Enable/Disable menuitems and was able to show both when used on a mixed selection. JD2 has recently changed behaviour here - before and after are equally insufficient. The JD1 way (two independent menuitems) seems better for users, simpler to code, and simpler to get the menu editor right...
Something I've missed from the day I switched to JD2: JD1 would check new URL's against those in the DL list, whether completed or not. Sure, JD1 was too silent about why is would skip some imputs, but one got used to that. My main gripe with JD: No true unattended mode. A user might want to leave JD running overnight and go to sleep, right? I do. What I want to tell JD is this: "Do start new downloads that have a chance to succeed without user input, but do not touch those where it is known in advance that user interaction is required." Neither Silent Mode nor "Stop but finish" do this. "Silent" will start connecting to the hoster, request a captcha, then dismiss it. Recaptcha would up until recently punish the amount of requests from a single IP due to this behaviour by switching all captchas to the hardest variant (the inverting blotch / consonant-only ones) after a few hours. "Stop but finish" is not even a guarantee that no new file will be started, and it will not continue downloading links with premium accounts / autosolvable captchas or the rare cases where a resume can be done captcha-free. I guess I am saying both functions would benefit from far simpler implementations: Silent should fulfill the "user is away" usecase, while "Stop but finish" shouldn't bother flagging random files with the yellow flag but simply stop any new DL from starting. Last one, really (JD is that good ): JD will not always start the expected file for a given hoster (assuming free modes, single active file per hoster allowed), sometimes even ignoring priorities. This is good, as I guess there is logic to avoid JD choking on unexpected plugin errors behind that, maybe even attempts to avoid discarding a partial resumable download by starting an alternate mirror from scratch instead (at which JD still fails). Leaving JD running unattended in silent mode will definitely show this sooner or later. And - I see work is being done in this area, observed behaviour is changing. My suggestion: JD should clear all such status information when the user hits the hard "Stop all running downloads" button, maybe even after a manual reconnect. Also, a manual change to any priority could clear said stati for all links using the same selected hoster. This would have helped all "insubordinations" I observed lately, where JD clearly started the "wrong" entries. Oh, and the bandwidth waste by unadvised mirror switches might be mitigated by having temporary priorities - boosting the prio of a resumable unfinished item by a virtual, internal half point? And keep up the good work! Last edited by raztoki; 08.09.2014 at 04:21. Reason: merge quad post into one, as rules stipulate. |
#670
|
|||
|
|||
Hi JD Team,
When JD2 first came out I was all excited and tried it but I found it not as Intuitive as JD1 ... things just work in JD1 and I know how to get around. With JD2, it seemed you guys followed Microsoft method of just Totally Re-Arranging everything so you have to learn from Scratch. I am not sure if you have a Portable version of JD2 ... so, I can test it side by side with my JD1. That would be a Great Idea to have Portable version. Also, is there a way to tell what is the LATEST version of JD2. Thanks. G! |
#671
|
||||
|
||||
@gonwk
all JD installations (once installed) can be copy pasted (except for mac dmg installer) to another path, file system, device and should work on other operating systems. There is a jar method if you choose not to run installers. JD2 not that much different than previous JD, GUI has changed slightly to make way for expanded feature set. Linkgrabber and download tabs are very similar to old, just now linkgrabber has optional side panel. there also totally customisable bottombar, toolbar, main menu, right click context(for download and linkgrabber tabs). Settings tab was simplied to make thing easier to find, as tree view isn't that friendly. All settings also have presence/property value in 'advanced settings' click the update button, it will tell you if you're on the latest version, and the traditional help > about can tell you build information of individual components that make up JDownloader.
__________________
raztoki @ jDownloader reporter/developer http://svn.jdownloader.org/users/170 Don't fight the system, use it to your advantage. :] |
#672
|
|||
|
|||
Quote:
I completely agree with your assessment. JD2 has made dogs bollocks of what JD1 did well. Stick around, and post new threads for the issues you find. Hopefully the community can help them whip JD2 back into shape. |
#673
|
||||
|
||||
@ohforf3141592653
re: unattended mode silent mode shouldn't start downloads when the plugin knowingly has captcha. It would only do so when plugin setting for hasCaptcha/hasAutoCaptcha isn't set or is set incorrectly. Also keep in mind that silent mode only works when enabled and JD isn't present in GUI. It has to be minimised to tray or taskbar. Some dialogs can not be pre-estimated for example pre-dl password, so once reached download sequence should stop for that download. I think it should skip download if pre-download password field is set (download property) re: priorities A few people have made reports about priorities, but we can not reproduce any issue reported. When we can't identify issue by reading code, reproduction is required in order find it with breakpoints. Think the last couple reports were due to downloadlink having different priorities to package. If you can reproduce issue and tell how, please find existing thread or make new one if you can't and tell us how. re: exists in download tab ticket has been present for a long time, not sure why Appwork doesn't close this, as its popular request and heavily used by users. Then again no one else from the community has offered patch either. re: mirror switching shouldn't happen specially with, if files exist rules == skip. I haven't seen this happen in a very long time myself. re: linkstatus Don't think that will change, error status are preserved until the next start is invoked(GUI/API/Linkgrabber adding && starting links). This gives indication to users why things happened. When selecting start, it will remove linkstatus events that can be retried, eg. will allow retry without the need of reconnection (IP limit reached, JD keeps track of reconnection/IP changes). You can manually clear linkstatus via the resume context menu for memory, without the need for stop start or reset. issue reporting If you can identify issue to any of your findings and can reproduce issue, please make reports about issue. Look for existing open threads on same topic, if you can't find one make a new thread. raztoki
__________________
raztoki @ jDownloader reporter/developer http://svn.jdownloader.org/users/170 Don't fight the system, use it to your advantage. :] Last edited by raztoki; 08.09.2014 at 11:14. |
#674
|
|||
|
|||
Hi raztoki & CuF,
Really appreciate both of you folks input. Well, I am Not Super Techy, just know enough to get myself in & out of trouble. @ CuF - Q1: Did you use the Installer mode for JD1 and JD2? Q2: Does JD1 and JD2 install in Separate Folders? I guess. @ raztoki - Q3: Is there a place that shows me how to do that JAR method you spoke of!?!? Thanks again, G! |
#675
|
||||
|
||||
@gonwk
goto jdownloader.org/download/offline grab the jar, run it via double click or java -jar JDownloader.jar from within directory you'd like it all be to run from. JD will dl the missing components. Jar method means you need to have java installed or provided first. raztoki
__________________
raztoki @ jDownloader reporter/developer http://svn.jdownloader.org/users/170 Don't fight the system, use it to your advantage. :] |
#676
|
|||
|
|||
Quote:
Worked like a Charm ... I have a Dumb Q, once installed when I want to Start JD2, is there a .exe that I click on or do I click on "jdownloader.jar" again to get it started? Thanks for all of your Help ... YOU are the BEST! G! |
#677
|
||||
|
||||
no, the jar method provides zero binary loaders (jdownloader.exe). That's what the installers provide, along with shortcuts and file associations.
you can create a shortcut to the jar (or double click jar), assuming our java is file associated with .jar (and not application like winrar).
__________________
raztoki @ jDownloader reporter/developer http://svn.jdownloader.org/users/170 Don't fight the system, use it to your advantage. :] |
#678
|
|||
|
|||
Hi raztoki,
Thanks for your Help. Now, I remember Why I did Not like JD2 as much. 1) I just tried a small Clip to download as a test of my new "JD2 Beta" ... so, the Darn JDownloader is telling me that I am missing ffmpeg program and if I wanted to download and install it ... Well, I said NO and guess what, the freaking JD2 did NOT download my Test Clip. 2) I went thru the entire Settings and ould NOT find how to disable the Auto LinkGrabber ... Totally Annoying. 3) I just restarted the JD2 for another test and it Remembered the Last Test Clip that I had DELETED from my LinkGrabber bank ... So, What's with that!?!? 4) The Columns under the Download Tab I find the columns Totally Useless to me ... all I need is the Original 4 Columns: Filename, Host, Status, Progress ... and that is all. May be I am missing the Benefits of having all other columns!!! It seems JD2 is a bit more difficult, more bells and whistles. Anyway, I think I will just stay with my Original JD1 for now, I know how to get around it. Thanks, G! Last edited by gonwk; 10.09.2014 at 02:56. |
#679
|
||||
|
||||
@gonwk
1) requires ffmpeg for youtube, on first requirement it should prompt and install on consent? or you can install yourself and define the advanced setting for ffmpeg path to binary(exe), you can also disable DASH downloads (advanced setting) if you rather not use DASH as source. Nearly all of youtube' newer formats are in DASH, so this can heavily limit your results if you do choose to disable. 2) auto linkgrabber? you can disable linkchecking services if that's what you mean. check advanced filter 'link check' 3) that's standard, you restart client any object in clipboard is processed, you can also disable this feature, see advanced use filter 'clipboard monitor first round' 4) you can define columns as you wish check right hand corner or right click on any of the columns to enable/disable Rest is up to you, JD is heavily configurable, we can no make one size fits all with layout or options. You will need to define them to suit your needs/desire. all the best
__________________
raztoki @ jDownloader reporter/developer http://svn.jdownloader.org/users/170 Don't fight the system, use it to your advantage. :] Last edited by raztoki; 09.09.2014 at 02:26. |
#680
|
|||
|
|||
Hi raztoki,
Thanks ... will try again. G! Last edited by gonwk; 10.09.2014 at 02:33. |
Thread Tools | |
Display Modes | |
|
|