Witam. Czy istnieje skrypt do rozłączania tego routera? Myślałem, że zrobię go sam ale nigdzie nie mogę odnaleźć na stronie konfiguracyjnej routera przycisku "disconnect" czy coś takiego. Proszę o odpowiedź.

[[[HSRC]]]
    [[[STEP]]]
        [[[REQUEST]]]
        GET / HTTP/1.1
        Host: %%%routerip%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET / HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /top.html HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /menu.html HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /info.html HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /menuTree.js HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /menuTitle.js HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /menuBcm.js HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /info.html HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /wancfg.cmd?action=view HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /wancfg.cmd?action=view&linkCtrl=0&vpi=0&vci=35&conId=1 HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /wancfg.cmd?action=view&linkCtrl=0&vpi=0&vci=35&conId=1 HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /wancfg.cmd?action=view&linkCtrl=1&vpi=0&vci=35&conId=1 HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

    [[[STEP]]]
        [[[REQUEST]]]
        GET /wancfg.cmd?action=view&linkCtrl=1&vpi=0&vci=35&conId=1 HTTP/1.1
        Host: %%%routerip%%%
        Authorization: Basic %%%basicauth%%%
        [[[/REQUEST]]]
    [[[/STEP]]]

[[[/HSRC]]]

Mam pytanie czy wiecie jak zrobić plik wykonujący ten skrypt?

Dołaczam sie do pytania, jak zrobic aby ten skrypt mozna było uruchomic z oddzielnego pliku bez udziału JD

Witam.
Zarejestrowa³em siê tutaj poniewa¿ posiadam podstawow± wiedzê na temat programu JDownloader. Nie wiem czy jest sens siê tutaj udzielaæ poniewa¿ polskie forum wygl±da na martwe. Poni¿ej napisa³em jak ustawiæ reconnect podanego przez Ciebie routera. Pozdrawiam!

1. W JD wchodzisz w zak³adkê Ustawienia>Modu³y>Ponowne po³±czenie
2. W wybór metody klikasz LiveHeader/Curl.
3. Wype³niasz pola:
U¿ytkownik: login do twojego routera (najczê¶ciej admin)
Has³o: has³o do twojego routera (najczê¶ciej admin)
IP routera: tu wiadomo (najczê¶ciej 192.168.1.1)
4. Teraz najwa¿niejsze, w to najwiêksze bia³e pole wklejasz podany ni¿ej skrypt.
5. Mo¿esz przetestowaæ skrypt klikaj±æ "Zmien adres IP"

Oto skrypt:

Spoiler:

[[[HSRC]]]
[[[STEP]]]
[[[REQUEST]]]
GET / HTTP/1.1
Host: %%%routerip%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET / HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /top.html HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /menu.html HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /info.html HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /menuTree.js HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /menuTitle.js HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /menuBcm.js HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /info.html HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /wancfg.cmd?action=view HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /wancfg.cmd?action=view&linkCtrl=0&vpi=0&vci=35&conId=1 HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /wancfg.cmd?action=view&linkCtrl=0&vpi=0&vci=35&conId=1 HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /wancfg.cmd?action=view&linkCtrl=1&vpi=0&vci=35&conId=1 HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[STEP]]]
[[[REQUEST]]]
GET /wancfg.cmd?action=view&linkCtrl=1&vpi=0&vci=35&conId=1 HTTP/1.1
Host: %%%routerip%%%
Authorization: Basic %%%basicauth%%%
[[[/REQUEST]]]
[[[/STEP]]]

[[[/HSRC]]]

Witam. Czy istnieje skrypt do rozłączania tego routera? Myślałem, że zrobię go sam ale nigdzie nie mogę odnaleźć na stronie konfiguracyjnej routera przycisku "disconnect" czy coś takiego. Proszę o odpowiedź.